Hot Selling Spray Dryer Machine Price / Milk Powder Spray Dryer

• After-sales Service: Free Technical Support and Accessories
• Warranty: 2 Years
• Heating Mode: Dielectric
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: HT-LXP5
• Material Status: Powder, Milk Powder Spray Dryer
• Atomization: Milk Powder Spray Dryer
• Flow: Contra-Flow
• Heat Source: Electricity, Milk Powder Spray Dryer
• Type: Milk Powder Spray Dryer
• Voltage: 380V
• Power: 18kw
• Name: Milk Powder Spray Dryer
• Capacity: 5L/H
• Transport Package: Fumigation-Free Wooden Box Packaging
• Specification: 2000*1300*2150mm
• Trademark: HONEST
• Origin: China
• HS Code: 8419399090
• Production Capacity: 500sets/Months
• Package Size: 220.00cm * 150.00cm * 240.00cm
• Package Gross Weight: 420.000kg

Product Description

                      Hot Selling Spray Dryer Machine Price / Milk Powder Spray Dryer

 

Product Description

Milk Powder Spray Dryer is the technology most widely used in the liquid technology shaping and in the drying industry.The drying technology is most suitable for producing solid powder or particle products from liquid materials,such as: solution, emulsion, suspension and papumpable ste states,For this reason,when the particle size and distribution of the final products, residual water contents, mass density and the particle shape must meet the precise standard, spray drying is one of the most desired technologies.

 
After been filtered and heated the air enters into the air distrbutor on the top of the dryer.The hot air enters into the drying room in the spiral form and uniformly. Passing through the high-speed centrifugal sprayer on the top of the tower,the material liquid will rotate and be sprayed into the extremely fine mist liquid beads.Throug the very short time of contacting the heat air,the materials can be dried into the final products.The final products will be discharged continuously from the bottom of the drying tower and from the cyclones. The waste gas will be discharged from blower.
 
The drying speed is high when the material liquid is atomized,the surface area of the material will increase greatly.In the hot-air flow,95%-98% of water can be evaporated at a moment.The time of completing the drying is only several seconds. This is especially suitable for drying the heat sensitive materials. Its final products own the good uniformity, flow ability & solubility. And the final products are high in purity and good in quality. The producition procedures are simple and the operation and control are easy.The liquid with moisture contents of 40-60%(for special materials,the contents might be up to 90%).can be dried into the powder or particle products once a time. After the drying process, there is no need for smashing and sorting,so as to reduce the operation procedures in the production and to enhance the product purity.The product particle diameters,looseness and water contents can be adjusted through changing the operation condition within a certain range. It is very convenient to carry out control and managment.
 

Product Parameters

 

Paramters	Type:HT-LXP
	5	25	50	100	150	200-2000
Inlet temperature °C	140~350 Automatically controlled
Outlet temperature °C	~80-90
Water evaporation capacity kg/h	5	25	50	100	150	200-2000
Drying form of centrifugal nozzle	Compressed air	Mechanism drive
Revolution of atomizer (r.p.m)	25000	18000	18000	18000	15000	8000-15000
Diameter of atomizing disc(mm)	50	100	120	140	150	180-340
Heating source	Electricity	Electricity+Steam	Electricity+Steam,Oil fuel,gas			Depends on the user
Max. power of electric heater (KW)	9	36	63	81	99
Overall dimension (m)	1.8×0.93×2.2	3×2.7×4.26	3.7×3.2×5.1	4.6×4.2×6	5.5×4.5×7	Depends on practical conditions
Dried powder recovery rate %	≥95	≥95	≥95	≥95	≥95	≥95

 

Detailed Photos

 

Certifications

 

Packaging & Shipping

 

Our Customer