High Productivity Toilet Tissue Paper / Toilet Tissue Machine
Product Description
The production line components: automatic feeding → synchronous embossing → wire drawing → automatic drop pipe rewinding → automatic cutting + spray glue (water) → automatic material guide → automatic paper cutting → automatic material handling → manual bagging; Fully automatic.
1. Rolling machine:
A. The equipment is unwinding three rolls of paper at the same time; each set of reels is equipped with two sets of wide belt unwinding; and the unwinding force is controlled by an independent hard-faced gear type turbine box for easy adjustment;
B. The equipment is equipped with a set of heavy-duty pneumatic automatic feeding device; the maximum tensile force can be 300kg; the maximum load can withstand 1.5 tons;
C. The equipment is equipped with a set of embossing devices; each set is made of steel carved and hard-coated flower roll combined with special thickened and wear-resistant wool layer roller embossing, the pattern is clear and no damage. (A variety of patterns can be customized according to customer requirements).
D. The equipment is equipped with a gear type turbine box to adjust the line spacing of the wire. The line is cut from 10-60CM without changing gears, which is convenient for regulating production. There is no waste, the line is light and stable, no noise, and domestically original.
Product Parameters
| Model |
HT-WSZ 1880 |
| Paper width |
≤1880mm |
| Dispensing rack |
The weight that can be tolerated is 5 tons |
| Base paper material |
11-30gsm toilet paper or kitchen paper |
| Base paper diameter |
≤1000mm or less |
| Raw paper core tube inner diameter |
3 inches = 76.2mm |
| Finished product diameter |
80-130mm |
| Finished paper core tube inner diameter |
38-48mm |
| Punch spacing |
100-600mm |
| Production speed |
0-120m/min |
| Control panel |
Color touch screen |
| Pneumatic system |
3 air compressors, minimum pressure 5kg/sm 2pa (customer-owned) |
| Power |
7.5kw |
| Voltage / frequency |
380V / 50Hz |
| Automatic feeding |
Double cylinder: 500kg pull |
| Spiral cutter shaft |
2 knife edge |
| Dimension(mm) |
4500*2400*1700mm |
| Weight |
3.8T |
Detailed Photos
Packaging & Shipping
Certifications
Our Customer
){kind=link}