High Effeciency Microwave Extraction System

• Type: Extraction Equipment
• Object: as Customized
• Separation Mode: as Shown on Manuals
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: HT-WB15C
• Operating Type: Continuous Type
• Installation: Vertical
• Centrifuge Type: Tube Centrifuge
• Distillation Equipment Type: as Shown on Manuals
• Extraction Tower Type: as Customized
• Pressure: as Customized
• Condition: New
• Item: Mirowave Extraction Equipment
• Microwave Power Range: 15kw
• Voltage: 220V±5%, 50Hz,/ 380V±5%, 50Hz
• Microwave Frequency: 2450MHz±50Hz
• Heating Tempearture: Can Be Adjustable
• Transport Package: Fumigation-Free Wooden Case
• Specification: 0.91*0.78*1.32m
• Trademark: HONEST
• Origin: China

Product Description

Product Description :
A Technical Parameters 
1. Product introduction:                                                
1)High speed.Microwave extraction is not only fast,but also the recovery rate is higher.It takes only 3 minutes to extract various tin metal organic compounds from precipitate.Compared with the usual extraction time,it reduce 20 ~ 100 times.
2)Saving energy.
3)Low solvent consumption.
4)Avoid thermal decomposition.Traditional extraction is based on heat conduction and thermal radiation by the outgoing,the material in the machine is in high temperature for a long time.But using microwave extraction equipment to extract,microwave penetrate the material and heat evenly and quickly.
2. Technical parameters :                        

Model	HT-WB6C	HT-WB8C	HT-WB15C	HT-WB40C
Voltage	3 Phase 380V±6%	3 Phase 380V±6%	3 Phase 380V±	3 Phase 380V±6% 50HZ
Microwave Output Power	≥6KW(adjustable)	≥8KW(adjustable)	15KW(adjustable)	40KW(adjustable)
Total Power	7KW	14KW	22KW	45KW
Microwave Working Frequency	2450MHZ±50HZ	2450MHZ±50HZ	2450MHZ±50HZ	2450MHZ±50HZ
Overall Dimension	L1000*W1000*H1200mm	L1200*W1000*H1700mm	L1500*W1200*H1800mm	L2000*W1800*H2400mm
Maximum pressure	Normal pressures
Microwave feed into wave ratio	<1.6
The chamber	6mm 304 # stainless steel.
Microwave feed way	feed around the cavity.
Cooling way	Dual forced air cooling transformer
The tank volume(capacity)	30L	100L	200L		400L

B.Product introduction:                                                  
I.Design Structure

1. The whole machine adopts high-quality components, two imported Toshiba air-cooled magnetron [1000W], the magnetron because of the use of high-aluminum ceramic sealing nozzle, its high temperature, high efficiency, anti-load capacity, long life , Reliable and stable operation, magnetron cooling fan for the Taiwan built Fan Products). Using special transformer with overheat protection WBL (high voltage 100KV high-quality transformers), the use of centrifugal fans, air-cooled double thermal protection ----- Most microwave manufacturers are using axial fan! Configure 100KV combo high voltage capacitor and silicon reactor and high reliability and high precision electronic circuit design system to ensure that the machine microwave output power of 2KW.
2. The machine uses high-quality food-grade stainless steel wire drawing board liner heating cavity (equipment stainless steel liner 1.5 mm stainless steel). Microwave output with PTFE plates and special materials sealed, well-designed phase complementary shaped open feed, so as to ensure the normal operation of the magnetron, output matching superior
performance, the heated material is more uniform and complete extension of the
magnetron And transformer core components such as life
3. The rack and the outer panels are all stainless steel material handling
4. The microwave feeding port is facing the upper part of the material. Bottom of tank installed 1.5 inch discharge valve

II.The Control System
1. The machine is equipped with a total control panel, elegant appearance. Microwave power adjustable.
2. Equipped with a thermometer one, the pyrometer high precision, anti-interference ability, the user can set the upper and lower limits of the temperature (such as control for the 80-90 ºC), in order to timely monitor the material in the heating process temperature, Automatically adjust the microwave power, real-time control of the material temperature, and electrical components damaged display.
3. A set of time control system.
III .Major Dispositions:
1. Stainless steel heating chamber, all stainless steel shape, the main frame
2. PTFE sealing material feed mouth
3. 2 Toshiba imported industrial magnetron(1000W)
4. 2 microwave adjustable power supply(1000W)
5. axial fans
6. temperature measurement system
7. Thermocouple temperature measurement system
8. a set of time controller

Packaging Delievery : 


Product Picture :



Certifications :


Our Customers :


Contact Us :